Fire alarm with water flow triggered at manufacturing site, Willoughby OH
Fire & ArsonA fire alarm activation occurred at a large single-story manufacturing building near Ben Hur Ave in Willoughby. Water flow was detected, but no fire was visible upon initial investigation from three sides. Fire units from Stations 1 and 2 responded to the alarm and conducted an investigation.
Audio|Source: Lake County Fire
02:12
Transcript:
00:00
Attention, Willoughby Fire, Station 1, Station 2, fire is needed at the Milta, near Ben Hur Ave for a fire alarm, showing water flows.
00:08
Willoughby Fire fired, (number withheld).
00:30
1411 dispatch 1411 1413 1419 and around to build two do not so we have a polling for that
00:46
e f and g g copy copy
00:59
14.23 dispatch.
01:04
Alright.
01:06
14.23, 14.14-152, 14.152 around in the middle of us.
01:13
So, Scott.
01:18
1411 dispatch.
01:24
Station 1 units are going to be on. See, we have a large, single-story manufacturing,
01:29
nothing showing from three sides. We'll be out of investigating.
01:33
1411 will be developed with command.
01:38
Okay.
01:47
14.3 dispatch.
01:52
Good.
01:55
Station 2 Unison scene, stage in an 8-5.
02:01
Does that chap?
02:05
Command to dispatch.
02:11
Command to dispatch.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Ben Hur Ave, Willoughby, OH 44094
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
