Fire alarm caused by faulty smoke detector, Wellesley MA
A fire alarm was activated at Deerfield Road. Fire responders arrived and found no fire. The alarm was due to a faulty smoke detector which was removed before they left. No danger or damage occurred.
Audio|Source: Wellesley Police and Fire, AreaWide3, Metro Fire
01:33
Transcript:
00:00
Engine 2, follow on.
00:04
Fire alarm[1] answering engine 2.
00:07
We're off in Deerfield Road, Agent 2S, Command.
00:13
Engine 2 on arrival through Deerfield Road, engine 2 has command 1555.
00:24
Wellesley 1417, Control.
00:28
14.
00:31
I'll be going out at strikefield.
00:36
Good, Steve.
00:38
14.04 to Walsinket control.
00:44
1404.
00:46
I don't know.
00:49
Receive.
00:56
1404 to all the central.
01:00
1404. 1404.
01:02
Clears services are under Braford.
01:05
Recifeith.
01:13
Deerfield command to fire alarm.
01:17
Fire alarm[1] answering Jafield command.
01:20
This was a faulty detector. We removed the detector. We're clear, command terminated.
01:28
Faulting detector,
01:29
detector has been removed.
01:31
Edge 2 is going to be clear, command terminated, 16-04.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Fire alarm: Activated automatic fire alarm signal
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Deerfield Rd, Wellesley, MA 02481
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect