Smoke triggers fire alarm at industrial building, Washington IL
Fire crews responded to a fire alarm at an industrial complex near North Cummings Lane in Washington. The alarm was caused by smoke from a machine, but no fire was found. The building was evacuated and later reopened after the situation was confirmed safe.
Audio|Source: Washington IL Fire and EMS
01:36
Transcript:
00:00
Washington Fire.
00:02
Near North Cummings Lane.
00:05
Northupon Plastics for a detector and general fire alarm.
00:09
Near North Cummings Lane.
00:16
Washington right here's up.
00:20
Washington City in route.
00:23
Washington Fire One in route.
00:27
Washington Fire One on the ground.
00:40
Alarm company called back, spoke with key holder; machine smoke caused alarm.
00:49
No flames present.
00:53
Fire 1 batteries, thank you.
00:55
We'll continue and check it out.
01:00
Washington Permanade 3.
01:02
Large industrial complex evacuated.
01:05
Checking it out.
01:13
Committee 2, Fire 1.
01:21
This was normal operation of the machine.
01:24
Operator offered to reset alarm.
01:26
People allowed back in the building.
01:27
We'll check it with the tick.
01:31
One copies.
01:33
Washington Fire, you can scan them at the station.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
N Cummings Ln, Washington, IL 61571
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect