No fire found after commercial alarm at Tacoma store, Tacoma WA
Fire & ArsonFirefighters responded to a commercial fire alarm at Harbor Freight Tools near 6th Avenue in Tacoma. Upon arrival, no fire, smoke, or evacuation was observed. No alarms were sounding. Fire crews are investigating the cause of the alarm.
Audio|Source: Tacoma Fire
02:6
Transcript:
00:00
Engine 16, Latter 3, and Battalion 1, Channel A3, Automatic Commercial Fire Alarm, Harbor Freight Tools, near 6th Avenue, engine 16, ladder 3, and Battalion 1, Channel A3, automatic commercial fire alarm, Harbor Freight Tools, near 6th Avenue, Time 847.
00:22
Tacoma 88 service mutant fire garage personnel, addition 4 for repair.
00:28
Receive 0 847.
00:29
Home Engine 16 is on scene near 6th Avenue, Harbor Freight Tools, a single-story strip mall, approximately 400 by 200.
00:41
We have nothing showing, nobody evacuating.
00:43
I do not see any strobes or hearing an alarm sounding.
00:45
Engine 16 will be investigating a ladder 3, standby on arrival.
00:49
Battalion 1, if you could take a look at the Charlie side, engine 16's retaining command.
00:54
To go and receive, engine 16, on-scene, command,
00:58
investigating, 852.
00:59
The 10-1 received, uh, engine 16 to 101 is responding from station 1, so I'll be there about 7 minutes.
01:09
It'll be delayed on your Charlie side, 360.
01:11
Very, see.
01:12
Command, Ladder 3, Rob.
01:13
You're going to see, would you like us to do a 360?
01:15
Lighter 3 from Command, that's affirmative.
01:16
Receive, Ladder 3, going to do a 360.
01:17
Go ahead and stand by on the Charlie side.
01:20
The receipt standby, the Charlie side command be advised.
01:23
Taraside appears to be clear at this time.
01:25
And receive.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near 6th Ave #B407, Tacoma, WA 98406
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
