Smoke detector triggers alarm with no visible fire, Spring Valley IL


Fire units responded to an activated smoke detector at near 2nd St. The strobe alarm was active but no fire or smoke was visible. Units confirmed the alarm was due to strobe activation only and found no further issues.
Audio|Source: LaSalle, Marshall, Bureau and Putnam Counties Fire and EMS Departments
00:58
Transcript:
00:00
Listout fire, you're needed for a still[1], near 2nd St, near 2nd St for an activated smoke detector, zone 84, Valcom Clear, 2036.
00:09
Camera, Oville, Oneberry, 29.
00:11
412 in Route near 2nd St, the activated fire alarm[2].
00:16
412, on the scene, strobe activation, nothing else showing will be out.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
still: Initial fire response assignment (Still Alarm) in Chicago
[2]
fire alarm: Automatic fire alarm activation reported
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near W 2nd St, Spring Valley, IL 61362
Correct
Incorrect