False fire alarm triggers response at commercial building, Shelby NC
Fire & ArsonA fire alarm was activated at a commercial building near East Dixon Boulevard, Grove Street, and South Post Road in Shelby. This is the third alarm activation at the same location within 18 hours. The alarm company reports it as a false alarm, and fire units are responding to confirm no fire is present.
Audio|Source: Cleveland County, Shelby, and Kings Mountain Fire
01:19
Transcript:
00:00
Shelby Station 3, Shelby Station 2.
00:03
Commercial Fire Alarm Pole Station Activation near East Dixon Boulevard.
00:09
Cross Street of Grove Street and South Post Road.
00:13
Shelby Station 3, Shelby Station 2.
00:16
Commercial Fire alarm pole station activation.
00:18
Near East Dixon Boulevard.
00:20
Cross Street of Grove Street and South Post Road.
00:24
When we also respond, this is going to be a third time in less than 18 hours.
00:27
This location is the same call.
00:29
10-4[1].
00:30
26, row.
00:31
26. 26. Inspector 1 are out.
00:33
Inspector 1.
00:34
Inspector 1. Get some route to East Dixon Boulevard in 1022.
00:38
The alarm company is going to be a false alarm.
00:40
26, me to catch.
00:41
We're responding to confirm.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / OK
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near E Dixon Blvd, Shelby, NC 28152
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
