False commercial fire alarm triggered during system test, San Jose CA
A commercial fire alarm near Pully Road was activated. Responders found no fire and concluded the alarm was triggered falsely, likely due to system testing.
Audio|Source: San Jose Fire
01:42
Transcript:
00:00
Tug 16, commercial general fire alarm, near Pully Road, near Cicliff Way and South King Road, Station 16's area.
00:13
2.9, pull station alarm in a high-life weather building, L.I.
00:18
Apartments, near Ella Village Lane, near Village Center Drive.
00:22
Station 29's area.
00:28
Engine 23, medical, near Oak Road, near Ridge Treeway and Oak Flat Road. Station 23's area.
00:42
The truck 29 is in route.
00:45
The truck 29 will show you in route.
00:47
Calls an alarm detail from the alarm company,
00:50
Zone 201 Pulse Station, Building 6 with no...
00:57
Of the engine 16.
01:01
Engine 16.
01:06
We're going to be handling the alarm. You can put the truck back in service.
01:12
Engine 16, 10, 4.
01:14
Truck 16, we'll show you back in service.
01:19
Further for engine 16, call from the alarm company,
01:24
a fire alarm from the control panel.
01:31
2.9. Struct 29, looks like they're testing on site, requesting, cancel.
01:37
Trit 29 copies back in service.
01:41
Truck 29, sir.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Blossom Hill Rd, San Jose, CA 95123
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect