Fire alarm caused by faulty detector at construction site, Salisbury MA
A fire alarm was reported at a building under construction near North End Blvd, Salisbury, MA. Fire units found no fire or hazard. The alarm was caused by a faulty heat detector on the building's exterior.
Audio|Source: Salisbury Fire
01:36
Transcript:
00:00
As far as we file, I'm on the air dispatching act, surrounded us to the area near North End Blvd,
00:05
given as a building under construction.
00:09
For a final alarm sounding, again, that's in the area near North End Blvd,
00:14
given as a building under construction.
00:17
For a fire alarm[1] sounding, call is from (number withheld).
00:29
Violin, engine 6 on responding.
00:34
Mission 6 on responding.
00:37
Squad 2 is on.
00:45
Squad 2 respond.
00:49
Engine 6 on the two-story residential.
00:53
The alarm sounding, nothing showing will be investigated.
00:59
Receive on arrival, a lot of sounding and nothing showing, (number withheld).
01:10
Fire alarm from engine 6.
01:18
Adjutantino-6.
01:20
Faulty heat detector on the exterior of the building.
01:24
Can we all set on scene, all units are clear returning?
01:30
Receive faulty detector on the exterior.
01:33
Committee on term rate.
01:35
Units turning (number withheld).
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
fire alarm: Automatic or manual fire alarm activation
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near North End Blvd, Salisbury, MA 01952
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect