False fire alarm at medical center due to dust, Rockport ME
Fire & ArsonA fire alarm was triggered at the Physicians Building of Pen Bay Medical Center near Glen Cove Drive. The building was evacuated as a precaution. No fire was found. The alarm was caused by sheet rock dust activating the detector. Fire crews assisted in resetting the alarm.
Audio|Source: Knox County Fire and EMS Dispatch
02:32
Transcript:
00:00
Rockport Fire respond to near Glen Cove Drive, Pen Bay Medical Center, Physicians Building, for Fire Alarm, called by the alarm monitoring companies,
00:08
giving 2E140 fire panels.
00:13
Dispatch code is 52 Charlie 3[1].
00:15
Rockport Fire is on to near Glen Cove Drive and the Medical Center Physicians Building.
00:20
4 fire alarm, called in by alarm monitoring company.
00:24
Giving Zone 2E, isn't Edward, 140 panel.
00:30
Dispatch code is going to be 52 Charlie 3[1]. Crush is going to be Wellness Ave and Anchor Drive. It's not clear.
00:40
Rock for a rescue 25 knock. We'll be en route.
00:45
Copyerski 25 that view.
00:48
Offboard engine 23 in Knox.
00:51
I mean, 23. Go ahead.
00:57
We'll be en route.
00:58
Copy-behavior.
01:08
Rockport Car 3 to knock.
01:13
Rockport Car 3, go ahead.
01:17
I'll be off on scene.
01:19
Story medical facility.
01:22
Building is being evacuated at this time. Nothing shown from the exterior.
01:27
Be out investigating.
01:34
Copy Rockport Carcery. Have you on scene? Three-story medical building? Nothing's showing. It is being evacuated. Have you out investigating?
01:48
25 knocks, we're up on team.
01:52
Copy RISB 25, have you. Okay.
01:56
Report engine 22 to knock, en route.
01:59
Copy our cord, engine 22, happy in route.
02:00
Copy-R cord, engine 22, happy in route.
02:09
Rockport Car 3 to knock.
02:13
Rockport Car 3, go ahead.
02:18
We're going to be all set with sheet rock dust and the detector.
02:21
Be on scene for a few minutes, helping reset.
02:27
Robbycar 3, have you all set on scene with sheet rock.
02:30
Be on scene.
02:32
Resetting your alarm.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
52 Charlie 3: Fire Priority Dispatch code: Protocol 52 (Alarms), Charlie-level priority, determinant 3 (alarm with reported smoke/smoke detector activation)
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Glen Cove Dr, Rockport, ME 04856
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
