False fire alarm caused by dust in detector, Richmond KY
Fire & ArsonFire units responded to a fire alarm at Keen Johnson Building, a 3-story structure. On arrival, nothing was visible and investigation found the alarm was triggered by dust in the detector. The scene was cleared.
Audio|Source: Madison County Fire
01:35
Transcript:
00:00
Unit 2 is in route, Keene Johnson.
00:02
Unit 3 in 825.
00:03
Tower 1, still be a route now before.
00:04
Tower 1 at 8.25.
00:06
Tower 1 at 825. Laddivision route. 3rd 825.
00:07
Unit 2 is on scene, 3-story structure, nothing visible from the outside.
00:12
870-11 command.
00:13
24-competit 20.
00:15
Ladder 3 is on scene.
00:17
10-4[1].
00:18
Tower once will be on scene, number one.
00:20
Have 4 820.
00:21
I was in the command.
00:22
Go ahead. See dust in the detector, they're cleaning.
00:25
Copy dust in the detector.
00:27
Tower 1, you can clear.
00:28
Tower one copy.
00:29
Great snap up one.
00:30
Tower ones will be clear scene.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / Message received
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Keen Johnson Building, 453 University Dr, Richmond, KY 40475
Correct
Incorrect
