Fire alarm triggered at Revere library with no fire found, Revere MA
Fire & ArsonThe fire alarm was triggered at a library in Revere, Massachusetts. Responders found a power malfunction in one of the detectors but no fire or hazardous conditions were detected. The alarm was determined to be caused by a faulty detector.
Audio|Source: Revere Fire
01:6
Transcript:
00:00
Library sure you can add the fire alarm[1].
00:03
Fire alarm is on command.
00:08
The power malfunction, one of the detectors, we'll just view it the dials just to be sure under the seal.
00:20
You report a malfunction one if it's a detective.
00:28
We've got up a couple more minutes.
00:30
Final method.
00:36
Avia heavy on 15 transporting lines to MGH.
00:41
You have a transport to MGH. You have transport to MGH.
00:48
Library State Commandant to fire alarm[1].
00:50
Zero readings with the C-O meter.
00:53
It was the quality detector.
00:56
Command Commanderated, companies review with China Charlie.
01:02
Commandant report zero readings, quality detector, company to turn Charlie.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
fire alarm: Activated automatic fire alarm signal
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Library St, Revere, MA 02151
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
