Firefighters Respond to False Alarm at Commercial Building
Fire & ArsonFirefighters checked a fire alarm at a commercial building, but it turned out to be a false alarm due to a malfunction. They monitored the building while waiting for the system to be fixed.
Audio|Source: Chatham County Fire
02:36
Transcript:
Engine 604, the second 601, Trump 601, response to commercial fire alarm, 101 St. Joseph Canler Drive. Ingen 604, 601, the second 601, truck 601, response to commercial fire alarm, 101, St. Joseph Candle and Drive, respond to Fireground 6[1], Fireground 6. U.S.B signs of the patient is on test. Receive dispatch. You can clear everybody with it, 7104. They continue to verify. Talking to 604 will continue to verify. Coffee, Cropole Team, Full Fee, Crab Machine Command. Command. Commandant is best. Can you advise how to the MS? There's no breathing issues at this moment. They need to transport to hospital for other reasons. Okay. On-te's engine, signal-4[2]. On-teens, restart commercial building. Same building as before, no evacuation, no active alarm. Take the 4 of the establishment St. Joe's command, investigated most. Folks, command this. Go ahead. Yes, they're going to be a faulty alarm, self-protector. They're going to be on firewatch[3] until the alarm company come out here and reset it. And you put all these next to service, determine a command, may I release fire round 32? We'll see, releasing fire at 1542.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Fireground 6: Fire operations channel
[2]
signal-4: No further assistance needed
[3]
firewatch: Fire crew remains on-site for safety after false alarm
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near St Joseph's/Candler Dr, Pooler, GA 31322
Correct
Incorrect
