Smoke detector alarm caused by contractor dust, Pittsburgh PA
Fire & ArsonA smoke detector alarm was triggered near Riviera Road. Fire stations responded but found that sanding dust from a contractor caused the alarm. It was a false alarm and no fire was detected.
Audio|Source: Allegheny County Fire - East
01:51
Transcript:
00:00
For smoke detector alarm, point of activation, zone 8, general smoke detector,
00:05
22 of their row, near Riviera Rd, Station 236, 2034, 233, respond east 53, 1049.
00:14
Bhoa!
00:19
Bhoa!
00:21
Bhoa! Bhoa!
00:26
B...
00:27
...a... ...a...
00:34
For a smoke detector alarm, point of activation, Zone 8, General Smoke Detector, near Riviera Rd,
00:42
Pumbo,
00:44
Station 236, 234, 233, 233, 2nd activation, respond is 53, 1054.
00:53
Holly, 236 engines in with 4.
00:59
236 engine in at 1055.
01:07
Johnny, 234 engine in.
01:11
234 engine in.
01:19
233 truck and rod driver, highway, 33 truck and rod driver, upward.
01:22
233 truck to 1055.
01:33
Companies alerted for near Riviera Rd, Plum Borough.
01:36
236 chief on scene by phone reporting sanding dust by a contractor.
01:43
False alarm all units can return 1058. 2038. 2.30,
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Riviera Rd, Pittsburgh, PA 15239
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
