Commercial alarm triggered at Milford Industrial business, Pikesville MD
BurglaryA commercial burglar alarm was activated at a business near Milford Industrial Blvd. The alarm triggered motion detection at the main door, but security reported no signs of danger so far.
Audio|Source: Baltimore County Municipal Police Departments
01:11
Transcript:
00:00
4-20, send it down commercial alarm.
00:03
Near Milford Industrial, a whole Milford Mill at the International Sound Corporation, so as it's a motion detector and alarm from the main door.
00:15
Time for. 5.31.
00:16
90, so take a copy.
00:17
Time for. 20-8-0-m-m-m-out.
00:18
Time for.
00:19
Or 28, did it say where the alarm was coming through?
00:22
2.8? 2.28? It says the main door and a motion alarm.
00:29
Is my emergency button reset now?
00:31
10-4[1]. So far, it seems like to secure.
00:33
29 can be probably 22.
00:34
Yes, it did not go off when you heat up.
00:38
Okay, 429 direct.
00:39
104. 104. And if we haven't gotten any other alarm for Smith Avenue, so that's a bit.
00:44
534. Okay, thank you.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgement; message received and understood (OK or affirmative).
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near Milford Industrial Blvd, Pikesville, MD 21208
Correct
Incorrect
