Commercial fire alarm triggers investigation in Monroe, Monroe NC
Fire & ArsonFire units responded to a commercial fire alarm at Builders First Source near Airport Road in Monroe, North Carolina. The alarm was triggered by a smoke detector, but no smoke or evacuation was observed. Command was established to investigate the situation.
Audio|Source: Union County and North Carolina State Fire
01:49
Transcript:
00:00
Way 4, Engine 6, and Battalion 1, Commercial Fire Alarm, near Airport Rd, Builders First Source, Cross Streets Airport Extension Road and Old Charlotte Highway, operate on Gulf.
00:13
Hain 4, Engine 6, and Battalion 1, Commercial Fire Alarm, near Airport Rd, Builders First Source, Cross Street's Airport Extension Road and Old Charlotte Highway, operate on Gulf.
00:32
And I'm going for an engine searcher off for a commercial fire alarm near Airport Rd, Cross Street of Airport Extension Road and Old Charlotte Highway.
00:43
Call them by the alarm company for a zone-tenth smoke detector, the builder's first source.
00:49
The closest hydrogen is going to be front of the business near the intersection of airport road and airport extension.
00:54
Nothing further.
00:55
Yes.
01:05
C-combe. It's Joe-2.
01:08
2.2.
01:10
Can you re-push this to active, please?
01:12
It's not coming across some computers.
01:19
CO2-2-1.
01:27
Clent4 is on saying near Airport Rd.
01:31
Large commercial building up and shown no evacuation.
01:34
Quintford is establishing airport road command.
01:38
We're going to be entering on the Alpha Delta Corner for investigation hold the current assignment.
01:46
And I'll be entering through Alpha Delta Whole Current, Howl Current, Command.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Airport Rd, Monroe, NC 28110
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
