Fire units respond to multiple residential fire reports, Mill Creek WA


Fire department units responded to multiple reports of potential fires at various residential locations near 164th Street Southeast and surrounding blocks in Snohomish County. The incidents are under investigation with no confirmed fire or arson, injuries, or evidence of crime reported.
Audio|Source: Snohomish County Fire Primary Response
02:46
Transcript:
00:00
BLF1[1] response,
00:02
near 164th Street Southeast.
00:03
near 164th Street Southeast.
00:05
near 164th Street Southeast.
00:07
near 164th Street Southeast.
00:09
Respond on TAC 2[4].
00:15
InJ-5 from Snowcombe.
00:18
Indy-five.
00:20
Indy-five, can I show you in route?
00:26
Engine 15. Aid[3] response.
00:30
near 229th Street Southwest. Respond on TAC 2[4].
00:33
near 229th Street Southwest.
00:35
near 229th Street Southwest.
00:40
Socombe engine 12.
00:42
Next up, transport, please.
00:44
Yeah, I went round over the radio, our MDT is down where I'm seeing.
00:49
Copy. I recall that now.
00:53
Excellent, transfer.
01:01
8.11. DLS2 response.
01:05
near 112th place Southeast.
01:09
Respond on TAC 2[4].
01:11
38.
01:12
near 112th place Southeast.
01:29
Medic 61, Med2 response, near 076th Street Northeast. Respond on TAC 1[5].
01:35
near 076th Street Northeast.
01:40
So if I'm engine in 816-fish contact.
01:44
Newly 16 vision.
01:45
Maynion 13 for some.
01:51
13?
01:53
Per PD, your patient's going to want to transport.
01:57
There's no balance.
01:58
And you can you repeat your traffic? Per PD, your patient will want a transport.
02:07
Last unit,
02:09
your radio was shorted.
02:11
Go again.
02:12
I copy that, thank you.
02:14
Can you please be a little transport?
02:16
favor.
02:18
Sorry about that, that's engine five minute five a prize.
02:23
Copy engine five minute a prior problem.
02:33
Aid[3] 76. BLS1[2] response, near 164th Street Southeast.
02:38
near 164th Street Southeast.
02:40
near 164th Street Southeast.
02:42
near 164th Street Southeast.
02:44
Respond on TAC 2[4].
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
BLF1: Basic Life Support response level 1 (low acuity)
[2]
BLS1: Basic Life Support, non-life-threatening medical response requiring prompt but not advanced intervention.
[3]
Aid: Medical aid response (basic life support)
[4]
TAC 2: Tactical radio channel 2 used for operations or on-scene communications.
[5]
TAC 1: Tactical radio channel 1 used for operational or on-scene communications.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.