Disclaimer
Information CrimeRadar provides is made available solely to protect the public. Using this information to harass, threaten, or harm anyone is prohibited. Information is provided by third parties and may have errors. We cannot guarantee the accuracy, completeness, or timeliness of the information. Location data may not be 100% accurate. Use extreme care and always verify information through official sources and exercise caution and judgment when using CrimeRadar. By clicking continue, I agree I have read and understand the above and agree to these terms and conditions.
Middleborough, MA

Fire alarm triggered by dust from street sweeper 

audio iconFire & Arson
Cowan Dr, Middleborough, MA 02346
A fire alarm was triggered because dust from a street sweeper entered the building. After checking, no fire was found and the system was reset.
Audio|Source: Carver Fire, Police, and EMS, Plymouth Fire/EMS, Wareham and Plympton Fire
01:12

Transcript:
You can't locate a detector. Do you want to attempt to reset? Yeah, it's affirmative. I'm talking to an employee now. There's a street sweeper going around the exterior of the building that was blowing dust into the inside of the building. Agent 2 to the command[1]. Reset appears to be holding. Cowan Drive, Commit, a firewall. Fireline, answering command. D-1 to 23 and 06. 23. 23. 06. I disregard 23, 24 and all set to start up to 94 from the street and get some type of disturbance going on up there. Buildings been ventilated, system reset and holding command terminated.

Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Agent 2 to the command: Fire response communication

Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.

Location mentioned:
Cowan Dr, Middleborough, MA 02346
Correct
Incorrect

Explore More on Middleborough, MA Crime Map

Recent Fire & Arson Incidents in Middleborough, MA

Explore the crime map for more.