Accidental sprinkler activation causes water leak, Maywood IL
The fire department responded to an automatic fire alarm near South First Avenue in Broadview. Upon arrival, there was no visible fire. The sprinkler system had accidentally activated, causing a water leak from a broken pipe. The units investigated and then returned to service.
Audio|Source: Berkeley Fire
01:34
Transcript:
00:00
Attention to Division 20.
00:06
May we fire department responded to an automatic fire alarm.
00:09
Near South First Avenue.
00:12
Near South First Avenue, Fox 300, for Broadview.
00:22
5.06, approaching 5thamination.
00:26
Go ahead and through, 506.
00:28
Go ahead and through.
00:35
500 official Madison.
00:38
7 is approaching fifth in Madison.
00:40
I can't dispatch as 7 is going to be en route because you don't want on first.
00:50
I'll send you around.
00:52
All right, 506 is on the scene.
00:55
We've got nothing showing.
00:56
We'll be on investigating.
00:59
5.06, I'm investigating.
01:06
5.07, we're going to go around to the other side of the building.
01:10
We're going to go around to the other side of the building.
01:15
We're at 507 to Broadview.
01:19
Go ahead.
01:22
You have to return and hit the sprinkler system and set it off, there's no issue.
01:27
Thanks.
01:29
Passage, Steve, we're in service returning.
01:32
I'll just have more returning.
01:33
I copies.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near S 1st Ave, Maywood, IL 60153
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect