Fire alarm and tamper switches tested at building, Lowell MA
Fire & ArsonFire alarm and tamper switches were tested at a multi-story building near Bridge St, Lowell, with no actual fire present.
Audio|Source: Lowell Police Department
02:12
Transcript:
00:00
Testing the tamper now.
00:04
Yeah, sir, flood the tamper.
00:10
This one's normal.
00:14
All right.
00:19
Do we have any history with her in near Bridge St? And if we do, do we have an apartment number?
00:31
I think...
00:42
So that was the main... Keep flowing water.
00:46
Third floor came in right after.
00:50
Got to be 32 for the third floor.
00:53
Can you repeat that?
00:58
32 seconds for the main flow, or for the third floor.
01:03
Okay, receive. We're going to reset it.
01:10
Another one floor.
01:13
Another one.
01:15
Can I see someone at your door, please?
01:18
Okay,
01:24
Um, where we send the tamper? Are you to send the tamper?
01:34
Second floor tamper.
01:52
Engine three to fire alarm[1].
01:54
We're clearing the drill back in service or turning a course.
01:56
Engine three, clearing the drill back in service, turn the course.
02:04
The main, keep flowing.
02:10
Second floor.
02:12
All right.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
fire alarm: Activated automatic fire alarm signal
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Bridge St, Lowell, MA
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
