False fire alarm during system maintenance on Ursula Ln, Los Altos Hills CA
A fire alarm was activated near Ursula Lane in the El Monte area. Responding fire units investigated and found that maintenance work on the system likely caused a false alarm. No fire was found and units cleared the scene.
Audio|Source: Santa Clara County Fire Agencies - South
01:36
Transcript:
00:00
74, fire alarm[1], near Ursula Lane, Elmonte's area.
00:12
County fires engine away clear and service now available.
00:16
Ended.
00:23
County Fire, 67, and 667 are cleared available.
00:28
And then 670.
00:34
County Fire inch of 57, we'll be clearing shortly.
00:38
We were able to clear the vehicle, the motorcycle has been ridden away, so the HP was in routes.
00:44
They can go to the NC for the information.
00:51
Call the HP.
00:58
County Fire engine 76 clear available.
01:02
Tendron 707.
01:08
1773 in route Locatelli RX, Local Penn. 73 in route 1348RX, Local 10.
01:16
73 in route 1348.
01:25
County Fire doorage 47.
01:28
We've made contact with service tech that's performing maintenance on the system. This can be a false alarm.
01:33
Engine 47 is completed and turning, switching back to our primary.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
fire alarm: Alarm activation/fire alarm call
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
