Fire alarm at building requires reset after check


Responders checked a building for hazards after a fire alarm went off, but found nothing wrong. The fire alarm needs to be reset.
Audio|Source: Kansas City Fire
00:41
Transcript:
00:00BLS 503, 106, Aulistrate 3, Affirmate 2, 6 person 83.00:05Truck 3 and quarters.00:08Truck 3 and quarter.00:10The dispatch is 102.00:17102.00:23Block the building, there's no hazards.00:25The alarm's still going off.00:27The RP will need to come out and reset the alarm.00:29There still will be an active alarm here.00:32Pumper 10, the car 102 will be in service.00:35Topper 10, Pumper 10, show you in service, walked around, no hazards, along still needs to be reset.
00:00
BLS 503, 106, Aulistrate 3, Affirmate 2, 6 person 83.
00:05
Truck 3 and quarters.
00:08
Truck 3 and quarter.
00:10
The dispatch is 102.
00:17
102.
00:23
Block the building, there's no hazards.
00:25
The alarm's still going off.
00:27
The RP will need to come out and reset the alarm.
00:29
There still will be an active alarm here.
00:32
Pumper 10, the car 102 will be in service.
00:35
Topper 10, Pumper 10, show you in service, walked around, no hazards, along still needs to be reset.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Kansas City, MO
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect