No fire found at commercial alarm on South Pineview Avenue, Goldsboro NC
Firefighters responded to a commercial fire alarm at the Pineview Group Home on South Pineview Avenue. Upon arrival, no fire was found and the alarm system was reset. No hazards were detected at the scene.
Audio|Source: Wayne County Fire and OPS Channels
02:24
Transcript:
00:00
Tyone 1, Battalion 1, Commercial Fire Alarm, near South Pineview Avenue, Pineview Group Homes.
00:08
Commercial Fire alarm, you're going to be on Ops 1, Operation, Ops 1, Central Clear, 34 after.
00:18
Alley once in route.
00:20
Probably out for one.
00:26
The power one's around?
00:30
Probably down one else one.
00:35
The 80 one's around, so you're not.
00:38
She was in around, which else is else.
00:40
The entire one's around this one.
00:47
Angel and one are not full.
00:54
For units in Route near Pine View, call me at Pine View Group Home.
00:57
Air animations will be down to the air smoke detector.
01:05
Any four is in route switch to one.
01:08
Copy 37 after.
01:14
Before the Hobbshorn.
01:17
Battalion 1's on scene two-story residential nothing showing side in battalion one to be pymie command piety battalion one on scene in command nothing showing 39 aster.
01:33
Okay situation four results sent me copy 40 after.
01:42
Same center, anyone built a single, Stade Warner slot.
01:46
Copy 41 after.
01:51
Tire 1 is on seat.
01:53
Temper.
01:58
Engine 2 is on safe.
02:02
Copy engine 2, 42 after.
02:09
Command engine four, we've found a system resetic pulled to clear the units of the units.
02:18
Copy that. Inj1, Tower 1, Engine 2, you can clear.
02:22
I'm going to clear I'll send your command over to you.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Ridge Dr, Goldsboro, NC 27530
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect