Fire alarm triggered at Gainesville building but reset, Gainesville TX
Fire & ArsonA fire alarm was triggered at a building near O'Neal St in Gainesville. The alarm company later canceled the emergency response after workers gave the correct code and reset the system. First responders checked with the manager to confirm the reset was done properly.
Audio|Source: Gainesville / Cooke County Public Safety
00:56
Transcript:
00:00
Needy enraught the A Bill of Gainesville at near O'Neal St for a fire alarm going off.
00:06
So on 845.
00:08
The fire alarm going off, under 845.
00:12
The engine two in route.
00:16
Sample.
00:21
E. 47, radio check.
00:23
Participation to Engine 2.
00:27
Go ahead.
00:31
The alarm company called back requesting cancel response.
00:35
Okay. The alarm has been activated by a patient.
00:40
Workers were able to give proper code and reset.
00:47
Receive, we're right here this guys, we're going to go ahead and make the entry, talk to the manager, make sure the assistance reset properly.
00:55
Go ahead and show us on scene.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near O'Neal St, Gainesville, TX 76240
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
