Faulty appliance triggers fire response at apartment complex, Fresno CA
Fire crews responded to a report of an outside fire at a three-story apartment complex near Mountview Road between Malaga and Edison. Upon arrival, no flames or smoke were visible. Investigation revealed the cause was a faulty appliance inside one of the units. Additional units were canceled as the situation was handled.
Audio|Source: Kern County Fire/Bakersfield Fire/USFS
02:54
Transcript:
00:00
Mission 46, outside fire on Mountview Road between Malaga and Edison.
00:15
13 is on scene, we got a high victim profile, two stories, excuse me, three story, apartment complex,
00:23
approximately 40 units.
00:27
Nothing showing, 13 investigating.
00:31
Just see copies 13 on scene.
00:34
They have a three-story apartment building, high victim profile, nothing's showing investigating.
00:44
It's 911's on scene.
00:47
Copy on scene 2043.
00:55
It's 911. It's 911.
00:56
It's 911.
01:13
35.
01:16
55, can you call under UCC?
01:20
Copy it.
01:23
Go ahead.
01:31
Company 16 in Italian, go ahead.
01:43
60, copy the stage, and indicate.
01:51
ECCC.
01:56
Intonate.
01:58
Good it, ambulance.
02:05
Company 13, battalion, one.
02:07
We've switched attack.
02:11
Only Code 2[1].
02:13
We'll show you complete 2046.
02:16
Copy.
02:17
Copy. See,
02:24
you can tell you one.
02:38
The UTC would sign one.
02:39
We've got a faulty appliance in the apartment.
02:42
12 and 13 can handle.
02:44
You can cancel, 16.
02:50
Allty appliance, 1213 can handle 16.
02:53
You can complete 249.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Code 2: Urgent, non-emergency response without lights or siren; proceed promptly while obeying all traffic laws.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Edison, CA
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect