Fire alarm activated twice at bank; no fire found


Emergency services responded to a fire alarm at a bank. The alarm went off twice, but there was no fire found. It appears the alarms were triggered by ongoing power surges at the location.
Audio|Source: Fairview Heights Public Safety
01:13
Transcript:
We're paging fire for a fire alarm at (name withheld), 6550, North Illinois. It's two general fire alarm zone 23, no further description. 10 more. 10.4. 2145, 10,000. Fairby fire department. Fairby Fire, respond to (name withheld), 6550, North Illinois, 6550, North Illinois Street. General fire alarm activated two times. General fire alarm activated two times, zone 23. No further description at (name withheld), 6550, North Illinois Street. Timeout, Kirby, Fire, at 1444. 32145, 10,000. 30-1-1-1-on-service. 3-4-House 1-1-on-service. 10-4[1]-house, 1-service. 10-4-house, 2 in service, 1444. 10-4, House 1-service. 7-4-4. 2,500. 2,500. This is a repeat of problem at this location every time there's power surge. I'm going to be responding, not emerging, all other units can stand by. 10-4. 2,500 responding all loaded units can stand by normal issue when the power surge.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgement/Message Received
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Near N Illinois St, Fairview Heights, IL 62208
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect