False fire alarm caused by faulty detector at commercial site, Elgin IL
Fire crews responded to a commercial fire alarm near 1111 which was a false alarm caused by a faulty detector. No fire was found and the alarm was taken out of service for maintenance.
Audio|Source: Elgin Fire
00:44
Transcript:
00:00
Algin fire to engine fire to engine seven.
00:04
Go ahead.
00:07
The alarm company received an additional trip of the Zone 1 general alarm near 1111.
00:16
As is received.
00:18
We attempted to reset the alarm.
00:20
There's no fire problem.
00:22
The faulty detector is going to keep activating.
00:26
We're going to have to take the alarm out of service so the keyholder can have some maintenance center.
00:38
Message received will advise the keyholder.
00:41
We don't monitor this alarm.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Elgin, IL
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect