Fire alarm activated, no fire found during investigation


A fire alarm was triggered at Mill Street, but no fire was found. The alarm likely went off due to a power outage caused by downed power lines. The homeowner was informed, and responders are leaving the scene.
Audio|Source: Dunstable Fire and EMS
01:7
Transcript:
Mill Street Command, Fire alarm. I'm answering Mill Street Commit. Place the call under control. We've got zero readings, O2. We're actively trying to reset the alarm system right now. Receive the call is going to be on the control. There's zero readings. I can't try to reset the alarm 1957. The Mill Street does not have any power. The Hill Street has no power, and that's due to the power line scene is down at 1070 Main Street. Very soon. Mill Street Command, Fire alarm. Fire alarm answering Mill Street, Command. homeowner's been advised with the alarm activation due to the power being cut out. Portage 1 is back in service, command is terminated.
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Mill St, Dunstable, MA 01827
Correct
Incorrect