Fire alarm triggered by roof leak at High Ave building, Canton OH
A fire alarm was triggered by a heat detector activation caused likely by a roof leak at a single-story building near High Ave Southwest. Investigation found no signs of fire. The alarm company was contacted for repair.
Audio|Source: Stark County Fire
01:31
Transcript:
00:00
near High Ave Southwest.
00:02
Single story building, nothing's showing from three sides.
00:06
We'll be out investigating.
00:13
Disvestion for a medic one.
00:17
Medic one.
00:19
Madic ones are out of Oldman.
00:23
Altman, 1035.
00:30
Mattlemedics re-dispatch.
00:37
We are clear, Oldman, Cantin, again.
00:43
Hi.
00:48
We'll be clear of Apple Grove, all other units remaining on scene currently.
00:56
That's clear.
00:57
Medics 3 will be complete on episode.
01:05
You guys, back in quarters?
01:09
Yes, MediCorps in quarters.
01:11
At 1040, thank you.
01:17
Circuit dispatch dispatch.
01:23
This was a heat detector going off more than likely due to a leak in the roof.
01:27
They are contacting the alarm company to come and repair. You can show Truck 8 available.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near High Ave SW, Canton, OH 44707
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect