Ammonia alarm triggers response at Sanford Road location, Canton MA
Fire & ArsonAn ammonia alarm was activated near Sanford Road. The system could not be reset, but no ammonia was detected in the room. The management contacted the ammonia company, and emergency units were released.
Audio|Source: Norfolk County Fire Control
01:5
Transcript:
00:00
Okay. Everyone, I have your responding near Sanford Road.
00:16
We have an ammonia alarm going off here that's tied into the fire alarm panel.
00:23
The management here is aware there's an ongoing issue.
00:28
They have contacted their ammonia company.
00:30
There's zero readings in the room at the time.
00:33
The system is unable to be reset.
00:35
We're going to clear engine two, engine four, ladder two.
00:40
Car 5 was sent in by phone.
00:44
Command, you're reporting an ammonia alarm, no readings.
00:50
Becoming to contact their ammonia company.
00:54
You're releasing the companies holding C5 at 736.
01:02
Command of a terminal, you can release the Fireground Channel going back to Ken.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Sanford Rd, Canton, MA 02021
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
