Alarm malfunction triggers fire response near Queens Peak, Canton CT
Heads up:
This is auto-generated from real-time dispatch calls. Information may be inaccurate. Listen to the original audio and verify critical information using official agency releases.
Fire & ArsonAccording to the dispatch call, fire crews responded to an activated alarm near Queens Peak Road in Collinsville. Units investigated and determined the alarm was faulty, with no fire or hazard found. All responding personnel cleared after confirming no issues.
Audio|Heard on: Canton Public Safety
Listen to dispatch call
03:47
Transcript:
00:00
Patient fire response to the 17 goes to the activated fire alarm and by the alarm company.
00:07
Zone is the first floor.
00:09
Near Queens Peak Road timeout 1856.
00:26
The space fire on the north tower, response number near Queens Peak Road for the activated fire alarm called by the alarm company.
00:33
The zone is labeled as the first floor.
00:36
Near Queens Peak timeout, 1857.
00:43
203.
00:45
Go ahead.
00:47
Can you head over to near Queens Peak Road for the activated fire alarm? Call them by the company.
00:55
Queens Peak, fire's been dispatched.
00:59
That's been dispatched.
01:10
Medical, you could attach me to that call.
01:15
10-4[1]-Medic 1 en route 1858.
01:20
Two-three, arrival 1904.
01:26
Two-three, arrival 1904.
01:32
This is important fighting crew of four.
01:38
Arrival 1904.
01:46
Two hundred three.
01:48
Two in three, go ahead.
01:54
One of them's an air.
02:00
My name's fine.
02:01
Nothing's out.
02:05
No issue's here if you're in camp like this.
02:16
Copy, alarm and error, no issue.
02:18
1906.
02:26
Based the fire on the north, on the cell tower, excuse me, per PG on scene,
02:32
the alarm is an error, the homeowner is on scene, and there is no
02:37
all units can clear.
02:41
1907.
02:56
Hey minute, Ranger 4.
03:04
Hey, Senator 4.
03:05
Go ahead.
03:14
Can you repeat the last message?
03:20
Based to engine 4 per my PD unit on the scene, the alarm is faulty, the homeowner is on the scene and there is no issue.
03:33
Engine 4 will continue cold and check out the residents with TIC and meters.
03:42
10 for resuming cold 19.08.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment or confirmation that a message was received and understood.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Queens Peak, Collinsville, CT 06019
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
Note:
Auto-generated from live dispatch audio, which may contain errors. Dispatch calls are not confirmed incidents. Always verify with official sources.
