Fire alarm caused by cooking or curtain at office building, Braintree MA


A fire alarm was triggered at a two-story office building near Wood Rd. On arrival, no fire or smoke was visible. The investigation found the cause to be either cooking activity or a curtain. The fire alarm panel was reset afterward.
Audio|Source: Braintree Fire
01:41
Transcript:
00:00
And J-J1 is off, two-story office building, nothing's showing.
00:02
And J-1 will be investigated with Wood Road Command.
00:05
J-1 is off, building nothing's showing.
00:08
And J-1 will be Woodrow Command.
00:10
Lattitude level one.
00:12
Ventureport is level one.
00:15
24 level one.
00:18
Okay, I choose on team. I choose on team.
00:19
Engine 2 is a cook and fault.
00:21
Inge 1 can handle.
00:22
Card 2 has a command, engine 1 to handle, clearing engine 4 out of 2.
00:31
2.2 clear. 2, clear.
00:32
2, clear. The engine one is going to be clear.
00:40
Command terminated[1].
00:41
Let's say that's one's clear, command terminated.
00:43
Filearm, Cartier will be clear.
00:45
Panel has been reset[2],
00:46
caused by curtain.
00:47
If Cartoon is cleared, panel reset, caused by cooking.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Command terminated: Incident resolved, no further action
[2]
Panel has been reset: Fire alarm system returned to normal status
Disclaimer:
This was transcribed by AI and may contain errors. Please verify the information independently.
Location mentioned:
Wood Rd, Braintree, MA 02184
Correct
Incorrect