False fire alarm caused by faulty smoke detector, Bellingham MA
Fire & ArsonFirefighters responded to a residential fire alarm near Trent Street. They found no fire but confirmed the alarm was caused by a faulty smoke detector. The homeowner was advised to replace the detector. No injuries or hazards were reported.
Audio|Source: Bellingham Police, Fire and EMS Dispatch
00:46
Transcript:
00:00
Action 3 on arrival near Trent Street, 2-story Wood 3 residential, nothing showing for 3 sides.
00:06
Engine 3 will be investigating L3 in Trent 3 command.
00:13
We received as an entry on arrival,
00:16
2-story wood residential, nothing showing from 3 sides.
00:20
Engine 3 is investigating L3S command 711.
00:25
Final alarm[1] from Trent Street, command.
00:32
Fire off.
00:37
Confirm, faulty detector.
00:39
Home orders that advised to replace.
00:41
No other issues out of this location.
00:44
Injury 3 is clear, command terminated.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Final alarm: Indicates the incident is concluded or no further resources are needed
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Bellingham, MA 02019
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
