False fire alarm triggered by occupant at residential home, Atlanta GA
Fire & ArsonFire units responded to a residential alarm near Glenview Circle that was triggered accidentally by an occupant. No fire or smoke was found at the scene.
Audio|Source: Atlanta Fire Rescue
01:25
Transcript:
00:00
show truck 36 on a clean near Glenview Circle, with Glenview Circle Command[1], has been showing on a two -story,
00:09
group single-family home.
00:14
Recease truck 36, 1733 hours.
00:21
Truck 11, fact, no more ratings on a gas monitor. It's oxidative ventilation structure.
00:26
Terminant to command, truck 11 in service.
00:29
Receiving service, 733 hours.
00:31
So,
00:32
service, transference, is there that for us.
00:39
Truck 15, Radio.
00:42
Truck 15, go ahead.
00:44
Radio, we checked two elevators in this location.
00:47
We found nobody in trap.
00:49
We think there's a third elevator down below.
00:52
Can you reach the back out to the caller and see there's still sight?
00:57
Recy.
00:58
We have any communication with anyone.
01:05
Seas for radio.
01:08
The third six radio.
01:11
Try 336, my hand.
01:17
It's going to be an at the dempter activation by the occupant, no fire, smoke, uh, the department not news. We're signing this. We're 1737.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Command: Incident Command; the unit or officer managing the incident
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Glenview Cir SW, Atlanta, GA 30331
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
