Commercial fire alarm triggered by faulty detector, Pittsburgh PA
A commercial fire alarm was triggered at Pittsburgh Cabinet near Railroad Road due to a faulty detector on the second floor. Fire units investigated and found no fire or hazard. All units were returned to service.
Audio|Source: Allegheny County Fire - East
02:44
Transcript:
00:00
That's a fire alarm for the same out.
00:01
Here's going in the end.
00:04
That's a permit.
00:17
The commercial fire alarm activation.
00:20
Pittsburgh cabinet,
00:22
near Railroad Road, that helps.
00:24
Point of activation zone eastward detectors and the second floor,
00:29
station is the 225,
00:32
227 truck, 222-22 adjun,
00:36
and 221 for the manpower, respond to use 5-3, 12 on 18.
00:43
Johnny, 2255 portable.
00:48
2.25 portable.
00:53
Even though it is still vacant 225 and 227 truck.
01:03
The east floor for Pittsburgh,
01:10
cabinets, near Railroad, and hills.
01:12
Turner 225 portable holding to station 225 as well as the truck company from 227.
01:19
The balance carry tire at 219.
01:24
1.3 squatters
01:28
Number for key holders.
01:34
Still needed it.
01:36
Two-three minutes ago, there was a keyholder on scene there.
01:42
Counties from 222-22 service are going to be on-scene.
01:45
Keyholder is still on-scene, standby for a thriller.
01:51
Company up State 22.
01:55
Copy 222 service on scene.
01:59
Key orders there as well.
02:02
Alright, 2211 station and running quarters from less device.
02:12
221, okay.
02:19
County from C-22 service.
02:28
Two-22 service, good.
02:31
The code. The keyholder believes there's a bad detector upstairs.
02:38
The alarm company continues to call back.
02:41
You can go ahead and return all units and show 22 back in service.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Railroad St, Pittsburgh, PA 15201
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect