Fire alarm at commercial building due to cooking error, Park City UT
Fire & ArsonFire department responded to a commercial fire alarm near Main Street in Park City. The alarm was confirmed to be caused by a cooking error and no actual fire occurred. Units were cleared from the scene.
Audio|Source: Summit County Sheriff, EMS and Park City Police
01:46
Transcript:
00:00
Truck 36, alarm commercial building, near Main Street.
00:05
Truck 36, on fire 2.
00:12
Italian 3 for Engine 31, up contacted, I'll find Forestry.
00:15
They said they were burning on solar mirror.
00:21
Copy that. All units will be clear and available.
00:27
Bill.
00:30
Six and out.
00:36
Tric 36-year-out.
00:37
Clark 36-year-out, near Main Street, and then Mary Street.
00:45
It's going to marry outside of watch.
00:47
1015 general fire job time is 0955.
00:55
Medican 138 is cleared from this prescribed bird.
00:59
You can show us in-robs that fire alarm, a similar.
01:05
You can show us available.
01:10
Check, I'll be available.
01:16
Again 38, are you clear on the detail?
01:23
Can we have them?
01:27
To the RP accidental activation of the cooking error.
01:34
Great, obviously shows available.
01:41
Okay, 37, I just spoke with staff here at Summit Watch.
01:44
They said that alarm was a cooking error.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Main St, Park City, UT 84060
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
