Activated carbon monoxide detector triggers fire response, Buffalo NY
A carbon monoxide detector was activated near Humboldt Pkwy S in Buffalo, triggering a fire department level 1 response. No fire was confirmed.
Audio|Source: Buffalo Fire
00:19
Transcript:
00:00
23, level 1 response[2], 195, through the avenue in the upper, still alarm[1].
00:06
That's between Wohlers and Humboldt for activated CO detector.
00:09
Enter 33, still alarm[1], level 1 response[2], 195.
00:13
Good at the avenue and the upper between Wohlers, the Humboldt, for activated CO detector, time off 15, 15 hours, so full fire.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
still alarm: Initial/non-box alarm notification (typically lower-level fire/alarm response)
[2]
level 1 response: Initial, minimal response requesting additional units or equipment for evaluation or support.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Humboldt Pkwy S, Buffalo, NY 14211
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect