Fire alarm triggered by melted light fixture in home, Ankeny IA
Fire & ArsonA resident cleaning a home near Northeast Briar Creek Place melted part of a light fixture causing the fire alarm to activate. The alarm cannot be reached to be turned off due to high ceilings.
Audio|Source: Polk County, Dallas County, and Warren County Public Safety and ISP
01:0
Transcript:
00:00
Public Assist[1], near Northeast Briar Creek Place.
00:02
Engine 1.31.
00:05
Public assist, near Northeast Briar Creek Place.
00:08
Between Northeast Milan Avenue and Northeast Milan Avenue.
00:13
Response 1.
00:14
Timeout. 1621.
00:26
Hi, gentlemen, can't come out and pass. Make an instructor and I'll be great.
00:30
Uh,
00:31
bye-bye.
00:32
Gabby.
00:37
Let's see en route.
00:39
Near Northeast Briar Creek Place.
00:44
Person is cleaning the house and accidentally melted part of a light fixture.
00:48
It melted part of it in a light fixture.
00:52
This is a home with 10 foot ceilings and they can't reach to turn off the fire alarm.
00:58
Near Northeast Briar Creek Place.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
Public Assist: Officer assisting a member of the public (non-criminal assistance)
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near NE Briar Crk Pl, Ankeny, IA 50021
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
